Henry

 


Home Search Aetna Airline Atwater Kent. Bendix Blaupunkt Bogen Bowers Breting 14 Bulova Crosley Delco Dentron Electro-Neutronics Emerson Emud Fairbanks Morse Grant, W. T. Grebe Grundig Grunow Hammarlund Hallicrafters Heathkit Henry Hickok 288X Howard Howard Johnson Jesse French Johnson Korting Lafayette Lap Amp Motorola NAD National. Nordmende Norelco Packard-Bell Perpetuum-Ebner PHILCO Philips PYE P35 RCA Robyn T-123B SABA Silvertone 4663 Standard A Stewart Warner Telefunken Triplet 3436 vhf gen Wagner Walgreen WEGA Westinghouse Yaesu ZENITH Links Audio Reinforcement Antenna Cabinet Finishing Capacitor stuffing Comments Dial Scales Dim Bulb Tester Electrodynamic Electrostatic Elmer is his name. Etching Emblems IF Transformers Lead Twister Leakage Tester Packing Tips Resistors Rodent Damage Shiny Chassis Slides & Presentations Tube Analyzing Vendors Laptop

 

 

Internal views of a Henry 1KD-5

This unit looks like it served a good hard life.  Many part changes and some mods.  Every licensed ham operator has the privilege and joy of repair, modifications and operations of their gear.  It is a great hobby.  

I did not apply power.  I feel this unit needs a complete disassembly, compared to factory diagrams, de-modified and restored before any juice (EMF) is to be applied.  Therefore I have no idea how the output tube would perform.  

"Rode hard, put away wet."

Top.JPG (188624 bytes)

Top

Top 2.JPG (207381 bytes) Clean.JPG (164743 bytes)

Clean.

Clean 2.JPG (139714 bytes)

Nice.

Unisulated Splice.JPG (164929 bytes)

Bare splice new resistor?

Missing PWR xfmr nutsbolts.JPG (121933 bytes)

Missing power transformer mounting screws.

Rplaced Xfmr.JPG (184884 bytes)

Possible replacement Transformer.

Poor wire joint.JPG (209243 bytes)

One open cap with and open bleeder resistor.

Re-paint masking.JPG (130712 bytes)

Trim Repainted

Re-worked.JPG (178274 bytes)

Rework.

RF section.JPG (208331 bytes)

RF cage.  Looks like replacement caps on switch.  

Non factory looking solder job.JPG (170691 bytes)

Looks like no factory solder joints to power switch.

Splice.JPG (195047 bytes)

Undocumented splices.

Jumper.JPG (165341 bytes)

Undocumented jumper.

HV joint.JPG (143300 bytes)

Poor HV solder work.  

Cut wires.JPG (173967 bytes)

We don't need no stinkin' red wires!

Well done 1KD, well done.  

 

Hit Counter

 Contact me including your thoughts and comments. 

Please see the LINKS page.  I have collected many resources over the years.

135,912 unique web site visitors (14,499,000 hits) from October 2004 through August 2011.

Copyright 2004 - 2012. All rights reserved.